Clamp Meter, UNI-T Multimeter Tester with Non-Contact Voltage Tester, Amp Meter Clamp for 2A AC/DC, LCD Display & Audible Buzzer UT210E

Clamp Meter, UNI-T Multimeter Tester with Non-Contact Voltage Tester, Amp Meter Clamp for 2A AC/DC, LCD Display & Audible Buzzer UT210E

Multi-Function Ammeter: Clamp meter multimeter current ranges good for low current so you can measure currents below 1A with decent accuracy and yet measure much higher currents if required, can accurately measure AC/DC current, AC/DC voltage, capacitance, resistance, diode, duty cycle, detection of live wires, low voltage, ammeter, but also has auto-ranging, (2-3 sampling rates per second) zero and hold, buzzer switch and input protection Basic Functions: DC current: 2A~100A, AC current: 2A~100A, DC voltage: 200mv~600v, AC voltage: 2v~600v, resistance: 200Ω~20MΩ, capacitance: 2nf~20mf, trms measurement, NCV non-contact voltage test, amperemeter achieves non-contact voltage detection through the top sensor, which wont damage the wires, sheath, clamp multimeter can easily and quickly determine the presence of voltage VFC Mode: DC ammeter with VFC function can reduce the impact of high frequency signals on the measurement results, long press the “SELECT/VFC” button to enter the VFC mode, in this mode, AC voltage and AC current can be measured without variable frequency interference Safety And Sensitivity: AC/DC clamp ammeter adopts high-tech inductive clamp head, DC clamp ammeter is equipped with high-performance chip, which can accurately measure small current signals, digital clamp ammeter has built-in overload protection measures, intelligent anti-burning, double insulation, safe and comprehensive Wide Application: The multimeter is suitable for household sockets, fuses, batteries, automotive circuit troubleshooting, charging systems, air conditioning maintenance, automotive electronics testing etc, Small mini portable, the multimeter can be placed in your pocket Main feature:
1. AC and DC current measurement, the minimum resolution is 1mA, and the maximum range is 100A;
2. AC voltage and current are all true effective value measurements;
3. Automatic range of voltage, capacitance and resistance files;
4. The diode file open circuit voltage of 3.2V can be used to measure the LED with a large voltage drop;
5. With ZERO and HOLD functions;
6. The non-contact voltage detection or NCV function is realized through the sensor on the top of the clamp head;
7. With VFC function, it can measure AC voltage and AC current with frequency conversion interference;
8. Small and exquisite, easy to carry.

Basic function and range and accuracy:
AC current (A): 2A/20A/100A &±(2.5%+5)
DC current (A): 2A/20A/100A &±(2%+3)
AC voltage (V): 2V/20V200V/600V &±(1%+3)
DC voltage (V): 200mV/2V/20V200V/600V &±(0.7%+3)
Resistance (Ω): 200Ω/2KΩ/20KΩ/200KΩ/2MΩ/20MΩ &±(1%+2)
Capacitance (F): 2nF/20nF/200nF/2μF/20μF/200μF/2mF/20mF &±(4%+5)

Special function:
Maximum display: 2000
Auto range: √
Opening size: 17mm
True effective value measurement TRMS: √
Diode test: about 3.0V
V.F.C: √
NCV: √
Digital retention: √
Zero measurement: √
LCD backlight: √
Automatic shutdown: about 15 minutes
On-off buzzer: √
Low voltage display: ≤2.5V
Input protection: √
Input impedance: ≥10MΩ

General characteristics
Power supply: AAA 1.5V × 2
LCD size: 39.3mm × 26.5 mm
Body color: red + gray
Body weight: 170g
Body size: 175mm × 60mm × 33.5mm
Standard accessories: UT210E- battery, test lead
Standard packaging: color box, cloth bag, manual, warranty card