uxcell ER32 Spring Collet, 4mm Chuck for CNC Engraving Machine Lathe Milling

uxcell ER32 Spring Collet, 4mm Chuck for CNC Engraving Machine Lathe Milling

Model - ER-32 Spring Collet, 4mm Clamping Diameter. Material - 65Mn Spring Steel with high abrasion resistance, high tensile strength, high elasticity, good clamping force, good elasticity, not easily deformed. Precision - 0.008mm / 0.0003-inch Applications - Suitable for CNC and precision engraving machines, five-axis linkage and other mechanical processing locking devices, and various types of high-precision machine tools. Package Content - 1 x Spring Collet Chuck Description:
This ER collet is used for CNC milling lathe tools and work holding engraving machines.

Collet must be placed into collet chuck nut before inserting into collet chuck.

Install and Disassembly Instruction:
Put the collet into the nut, turn it slightly, and wait until the eccentric part of the nut is recessed into the circlip groove, push the collet evenly to fit it into the nut.

Install the collet and nut on the chuck body or the spindle of the machine tool together, put the engraving tool into the clamping hole, use a wrench to tighten the nut until the engraving tool is firmly clamped.

When replacing the engraving tool, use a wrench to loosen the nut to bring out the chuck and engraving tool, remove the engraving tool, push the collet to make it exit, and then replace the collet with other size as needed.

Specifications:

Model: ER32

Clamping Diameter: 4mm

Material: 65Mn Spring Steel

Precision: 0.008mm / 0.0003-inch

Total Height: 40mm / 1.57-inch

Outer Diameter(Max): 33mm / 1.3-inch


Package Includes:

1 x Spring Collet