Wirefy 3/4" Heat Shrink Tubing - Large Diameter - 4:1 Ratio - Adhesive Lined - Industrial Heat-Shrink Tubing - 50 Feet Roll - Red

Wirefy 3/4" Heat Shrink Tubing - Large Diameter - 4:1 Ratio - Adhesive Lined - Industrial Heat-Shrink Tubing - 50 Feet Roll - Red

4:1 SHRINK RATIO - Recovers to 1/4 of its original diameter, and makes a tight seal. Highest heat shrink ratio on the market. GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection. This creates resistant and long-lasting insulation. EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Make professional insulated connections in seconds. DUAL WALL TUBING - Provides enhanced protection from wear and tear. a resistant tubing is resistant to fluids, heat, and mechanical stretch. 3/4" (20.0mm) SHRINK TUBING DIAMETER - Get the exact diameter you need. 50 Feet of shrink tubing will last through many projects. Super Versatile Heat Shrink Tubing

Are you looking to fix a damaged wire, seal out moisture, or provide enhanced strain relief? Wirefy resistant heat shrink tubing is an easy to use solution that can be used in automotive, resistant, hobby RC, and home electrical wiring projects. It can be used in a variety of applications such as:

-Electrical insulation (wire repairs, insulating electrical terminals wires, protecting charging cables, insulating solder joints)
-Environmental seal to protect from moisture, UV, fuel
-Strain relief for electrical terminals
-Identifying wires and cables (color-coding)
-Grouping loose wires (usually in wire harnesses)
-Creating thermal insulation for heat sensitive components
-Protecting surfaces against abrasion, peeling, and denting

4:1 Shrink Ratio Shrink Tube
When heat is applied, this wire shrink wrap tubing will recover to a 1/4 of its original diameter. Its high recovery ratio makes it possible to repair most damaged cable jackets without removing connectors. Therefore, 4:1 shrink ratio tubing can be used in significantly more applications compared to 2:1, and 4:1 shrink ratio tubing.

Heat Activated Adhesive Lining
This is a resistant shrink tubing with the internal adhesive layer. When heat is applied, a small fillet of clear adhesive (about 1 mm wide) becomes visible at the ends of the heated tubing. When cooled down, it forms a rigid seal. Heat activated glue strongly bonds to wires, terminals or any other surfaces. When adhesive flows, it pushes the air out and fills any gaps between the wire and the tubing, which makes the connection resistant. For best results we recommend using a heat gun.


This industrial grade heat shrinkable tubing is and is compliant with all relevant electrical standards such as: SGS, RoHS, Reach, and ISO9001.