Proxicast 25 ft N Male to N Male Premium 400 Series Low-Loss Coax Cable (50 Ohm) for 4G LTE, 5G Modems/Routers, Ham, ADS-B, GPS, RF Radio to Antenna

Proxicast 25 ft N Male to N Male Premium 400 Series Low-Loss Coax Cable (50 Ohm) for 4G LTE, 5G Modems/Routers, Ham, ADS-B, GPS, RF Radio to Antenna

N MALE to N MALE Coax Jumper Patch Cable Assembly Connects between 2 N-Female Devices (Radio, Amplifier, Surge Arrester, Splitter, Meter Antenna) VERY LOW-LOSS DOUBLE SHIELDED LMR400-size 50-Ohm Coax Meets or Exceeds Times Microwave LMR400 Specifications - Up to 70% Less Loss than RG8U & RG213U Coax SOLID COPPER CLAD ALUMINUM CORE WIRE - Braided Tinned Copper Shielding - Low VSWR - Indoor & Outdoor Use PRO-GRADE QUALITY - Gold Plated Signal Pins - Heat Shrink on Both Ends - Tough PE Outer Jacket Withstands Abrasions & Provides Excellent Outdoor Moisture Resistance 100% FACTORY TESTED - Each Cable Assembly is Fully Tested COMPATIBLE WITH all 50 Ohm N Connector Equipment - *Not* Compatible with TV, Satellite or Other 75 Ohm Systems Coaxial jumper cable. Use to connect between N-Female antennas, amps, radios, routers, etc.

Specifications

Connector 1: N Male plug w/ Gold-Plated pin (50 ohm)
Connector 2: N Male plug w/ Gold-Plated pin (50 ohm)
Coax: Low-loss LMR 400 size (0.400 in dia)
Length: 25 feet
Impedance: 50 ohm

RF Connectors

SMA Female jacks are commonly used on 3G/4G/LTE cellular modems, routers and signal amplifiers - check with your equipment manufacturer.

Many indoor cellular antennas have SMA Male connectors; most outdoor antennas have either N-Male or N-Female connectors.

RP-SMA (Reverse Polarity) connectors are commonly used on Wi-Fi equipment. SMA and RP-SMA connectors will not mate.

Video equipment (cable, satellite, TV, etc) uses "F" connectors - which look similar to SMA but they will not mate with SMA connectors.

See the photo gallery above for pictures of the exact connectors on this coax extension cable and note the gender of the connectors you need to ensure male-to-female mating.

All outdoor connections should be weather-proofed to minimize moisture in the cabling. Use our Self-Bonding silicone tape (ANT-900-002 ASIN: B00K5GW67O) for fast and easy connection sealing.