Stickyart Grey Wood Wallpaper Peel and Stick Vintage Contact Paper Wood for Cabinets Grey Wood Vinyl Wallpaper Self Adhesive Wood Wall Paper Stick on

Stickyart Grey Wood Wallpaper Peel and Stick Vintage Contact Paper Wood for Cabinets Grey Wood Vinyl Wallpaper Self Adhesive Wood Wall Paper Stick on

𝐁𝐔𝐁𝐁𝐋𝐄 𝐅𝐑𝐄𝐄: Grooves on the back of this rustic wood contact paper help release air, let's say goodbye to annoying bubbles. 𝐃𝐔𝐑𝐀𝐁𝐋𝐄: This rustic wood wallpaper is thick enough to hide imperfections on the underlying surface quite well. Not easy to tear. 𝐑𝐄𝐍𝐓𝐄𝐑 𝐅𝐑𝐈𝐄𝐍𝐃𝐋𝐘: Free to peel wood color contact paper off with no sticky residue left behind when you move out. Won't damage walls and furniture when using the wood wallpaper peel and stick. 𝐄𝐀𝐒𝐘 𝐓𝐎 𝐂𝐋𝐄𝐀𝐍: With a waterproof surface, dirt and stains on this contact paper gray wood grain can be easily removed with just a damp cloth. 𝐌𝐔𝐋𝐓𝐈-𝐏𝐔𝐑𝐏𝐎𝐒𝐄: This wood contact paper peel and stick can be used on every flat& clean& smooth& dry surfaces. Ideal for covering baseboards, beams, stair risers, countertops, backsplash, cabinets, shelves, dresser drawers, closets, bedside tables, bookcase, doors, DIY crafts, etc. Notes:
1. 15.8 inches x 78.7 inches wallpaper rolls that can cover up to 8.6 square feet.
2. The colors on the pictures are for reference only, as color tones can vary due to lighting in the room or chromatic aberration of computer screens.
3. Slight odor is normal and it will disappear after ventilation within several days.
4. Colors of wallpaper are slightly different from batch to batch, it's recommended to calculate the size before purchasing. And buy enough rolls at a time to make sure they come from the same batch to avoid color difference.
5. Although the maximum temperature the wallpaper could withstand is about 155℉. For the consideration of its life and effect, placing a hot pan onto a table mat rather than the wallpaper directly is recommended, which could avoid leaving a mark on the wallpaper.

Instruction Steps:
1. Ensure the surface is clean, smooth, dry and flat before application.
2. Measure the size of the surface you need to cover, cut the wallpaper to the desired size.
3. Peel off a portion of the backing slightly. (Do not remove the entire backing at once.)
4. Stick it. Using a cloth (even a sock is OK) to smooth the wallpaper to the surface from the center to edges as you go. (It's better for two people to do it, one hold the top and one unroll and stick it.)
5. Check for bubbles. Use a needle to pierce them, squeeze the air out.
6. Trimming excess wallpaper, then enjoy your new surface!
Tip: For installation in corners or curved areas, it is recommended to use a hair dryer to heat the wallpaper for better results of bending around edges. (3-4 inches away from the wallpaper or it will melt).