Wigearss Arcade Game RGB/CGA/EGA to VGA HD Game Video Output Converter Board for Arcade Monitor to CRT LCD PDP Projector

Wigearss Arcade Game RGB/CGA/EGA to VGA HD Game Video Output Converter Board for Arcade Monitor to CRT LCD PDP Projector

The high definition Video converter is a professional game converter, which support all games. Supports CGA/EGA/VGA/YUV Component Signal Input. CGA/EGA/VGA signal auto scan (15KHz, 24KHz, 31KHz),Supports VGA Output (640 x 480, 800 x 600, 1024 x 768, 1360 x 768). It can convert CGA/EGA/VGA/YUV Component input Signal to the HD Monitors (CRT Monitor LCD Monitor PDP Monitor) with VGA interface (VGA video signal), and automatically scan CGA / EGA / YUV signal, VGA output signals. True digital 24-bit A/D converter for true 16.7-million color conversion. Supports image position control & image zoom control. Screen Display (English and Chinese) Supports all types of VGA monitors (CRT, LCD, PDP, Projector, etc). To change the language, press the MENU button, go to Language, and choose your preferred language. IMPORTANT TROUBLESHOOTING TIPS FOR IMAGE SYNC: 1.Auto-Calibration: If the image is shaky or jittery, please press the 'AUTO' button on the control board to automatically calibrate the signal. 2.Common Grounding: For the best performance, ensure the converter and the game board share the same power supply. If using separate power sources, make sure the Ground (GND) wires are connected to prevent signal interference. 3.Signal Ground: Double-check that the input signal GND wire is properly connected to the converter's GND port. 4.Power Requirements: Use a high-quality power adapter (DC 5V, at least 2A) to ensure stable signal processing. Description:
- Power Supply Input: DC 5V/2A
- Input Signal Format: RGBS, RGBHV, YPbPr
- Input RGBS Format: 15kHz, 24kHz, 31kHz horizontal frequency signal automatic scanning
- Input RGBHV Format: 31k horizontal frequency signal
- Input YPbPr Format: 480i-60, 576i-50, 1080i-50, 1080i-60, 480p-60, 576p-60, 720p-50, 720p-60, 1080p-50, 1080p-60 automatic identification
- Output signal: VGA: 640 * 480,800 * 600,1024 * 768,1360 * 768
- True digital 24-bit A / D converter for real 16.7 million color conversion.
- Supports ALL types of VGA monitors (CRT, LCD, PDP, projector, etc.)

MENU CONTROL
- “MENU” open OSD menu, and enter.
- “UP” up and increase.
- “DOWN/AUTO” down and reduce.
-Press this key: auto scan CGA/EGA signal
-Press this key over 5 second and release: reset system
(this operation is invalid when you open OSD menu)
- “SW” switch input signal Ypbpr/RGBS/RGBHV.

(this operation is invalid when you open OSD menu)
-“Clamp sp” and “Clamp” please don’t adjust this button, except the monitor has black item or picture discoloration.
- For more functions control, please look at OSD to operate.

NOTE: Soldering required. Installation manual is NOT included!!
Package Includes:
1 x Converter board
1 x power supply wire