FUNSHOWCASE Shark Resin Molds Epoxy Silicone Aquatic Animal Underwater Creature for Bath Bomb, Tray, Mobile Phone Holder, Key Holder

FUNSHOWCASE Shark Resin Molds Epoxy Silicone Aquatic Animal Underwater Creature for Bath Bomb, Tray, Mobile Phone Holder, Key Holder

Make beach attach scene diarama, shark attack bookends, cabinet knob embellishment, tray, mobile phone holder, Key Holder and more creative projects. Head high around 3inch width around 4inch, tail high around 5inch width around 3inch. Notice: for some materials such as fondant, will be hard to take out of the mold, it should only works for the head part and the mold need to be cut out when release, just for one time use. For some materials will be hard to release form the tail part such as fondant, since fondant is unable to get hardened. Chocolate can use for the tail mold by cutting out with scissors when release Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more. Can also be used with food material such as ice, gum paste, jelly, marzipan, fondant, sugarpaste, melted candy & chocolate etc Durable and transparent soft mold, you can check the buttom when process project. Easy to demold, shiny finish. Demolding tips: Add body oil to mold till resin dried, twist it then figurine will pop out Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit

Mold color: clear

Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)

Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit

Can be used with dishwasher/oven/refrigerator

Food grade, no BPA/PVC/phthalate

Wash and boil before use, especially for food

More Tips to use with Epoxy Resin:

1) Poured in silicone molds in layers, allowing air bubbles completely escape;

2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven.

3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard.

4) Do not use water-base ink for resin casting.

5) After baking clay / resin in complex or deep molds release the finished product under running water with soap.

6) Put in refrigerator a while/ soak in hot water a while/ release with body oil if it is hard to release.