MRbrew Wort Chiller 30 Plates, Brazed Plate Copper Heat Exchanger for Homebrew, Stainless Steel 7.5" x 2.9" Plate, 1/2 NPT Thread Connection Hot

MRbrew Wort Chiller 30 Plates, Brazed Plate Copper Heat Exchanger for Homebrew, Stainless Steel 7.5" x 2.9" Plate, 1/2 NPT Thread Connection Hot

【CHILLS WORT IN MINUTES!】MRbrew 30-plate wort chiller cools wort faster than the immersion chiller by increasing surface area covered by cold water and running wort between plate and plate meanwhile. Gone for you are the days of an immension chiller that takes hours! 【HIGHLY SAVE YOUR WALLET】This super-efficient chiller uses less water than any other chiller on the market, the wort is flowing through the chambers inside the plate chiller and aerates for your pitching yeast, you will save water and and cost of buying an aeration stone and CO2 canisters, it is especially great for brewers in southern climates! 【NO LEAKS & RUST-FREE】This wort chiller's plates and fittings are made of 304 stainless steel and have been brazed together with pure copper in an oxygen-free furnace, there is no potential for leaks and rust, can withstand -321F to 392F. Do remember to clean the inlets and outlets to remove metal debris before use! 【GREAT UPGRADE】The chiller connection ports are all 1/2" male NPT quick disconnect fittings. It has a tremendously low restriction, which makes it ideal for working with a pump to do gravity transferring. Working with a pump will increase flow rates through the chiller, allow for more mounting options and add the ultimate flexibility during the brew day! 【EASY TO USE AND CLEAN】The Wort Chiller is designed for effortless cleaning—simply rinse with a cleaning solution and water for thorough maintenance. Ideal for both laboratory and home beer brewing, it efficiently facilitates heat exchange between two liquids, saving you time and delivering exceptional cooling performance. 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew 30 plates wort chiller is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied! MRbrew BRAND HIGH-QUALITY 30-PLATE WORT CHILLER BRINGS HOMEBREWING SURPRISE TO YOU!

The fastest and the most efficient tool to chill your wort to yeast pitching temperature
There is no need to recirculate the wort back into the kettle because it is already cooled to the temp you need when out of the chiller
The wort chilling rate is depending on tap water temperature and rate of flow, colder of water, more slowly of wort flow, chilling is faster

ABOUT SPECIFICATIONS
Four ports thread: 1/2’’ NPT
Dimensions: 7.5" L x 2.9" W x 2.9" H

OPERATION TIPS
1. Soak the wort side in a suitable cleaning solution
2. Rinse with water, after filling it with cleaning solution, tip it from side to side to make sure air bubbles escape
3. Let dry after it has been flushed
4. Connect wort-in port to the mash tun
5. Connect wort-out port to your fermenter
6. Connect water-in port to garden hose getting cool water
7. Connect water-out port to garden hose to remove warm water
8. Turn on the cooling water first and then open the valve on your pot to start the wort flow
9. Flush the wort side of the chiller with plenty of clean water immediately after use
10. To remove deposits, soak in a suitable cleaner for 4 hours and then flush

TEST THE WATER SIDE
Check leaks by running your garden hose briefly before cooling wort
Use a KettleScreen on the inside of your pot to prevent large particles in the wort from clogging your chiller

AVOID FREEZING & CHLORINE BLEACH
If the chiller is allowed to freeze with liquid inside it, it could damage the plates
Dilute chlorine bleach will rust the chiller if left in contact for more than 4 hours

NOTE:
Please careful on the first use, the bottom of the chiller is a little sharp!!!

YOU WILL SURPRISINGLY GET
1* 30-Plate wort chiller