Water Sensor Switch, Fs-1/2-Nylon G1/2in External/Internal Thread DC0-110V Plastic Water Control Sensor Switch, Sensor Switch

Water Sensor Switch, Fs-1/2-Nylon G1/2in External/Internal Thread DC0-110V Plastic Water Control Sensor Switch, Sensor Switch

The switch is a sensor device that converts the of water into an electrical switch when a certain is reached The switch consists of a magnetic core, return spring, housing and sensor made of forged copper or polycarbonate The shell is made of forged H58 copper or polycarbonate, the magnetic core made of NdFeB permanent magnet material and the magnetic switch of the sensor is an imported component of medium power The inlet and outlet openings are G1/2 inch standard pipe thread, which is convenient for connection The switch has the advantages of high sensitivity and strong durability.

Specification:

Item Type: Plastic Water Sensor Switch Model: Fs-1/2-Nylon
Interface Thread Size: Male/Female Threads are G1/2in
Material: Nylon < BR> Working voltage: DC0-110V
Working current: 0.5-1A
Average specific weight: 0.7
output load: DC24V/0.5A, 36V/0.5A
Suitable ambient temperature: ≥ 1 ℃
Suitable working temperature: ≤ 100 ℃
Minimum start : ≥0.75 l/min
Maximum : ≤5 l/min
Nominal working pressure: ≤ 0.65 MPa
Maximum pressure the shell: ≤1.5 MPa length: approx. 64 mm
Principle of If the water in the pipeline is greater than 0.75 l/min, the magnetic core is displaced under the effect of the water and drives the magnetic source to produce a magnetron effect that causes the sensor outputs a "1". Switching that is input into the device control system. After the power boost, the purpose of water control is achieved. If the water in the pipeline is less than 0.75 l/min, the magnetic core drives the magnetic source back under the force of the return spring, so that the sensor outputs a "0" switching to stop the system

Adjustment scope and conditions:
(1) The ambient temperature is not lower than 0 ° C. Do not knock on the case. Keep away from magnetic objects
(2) The output of the is a switching value, therefore the connection method of the control object must also be a switching control relationship.
(3) The performance of the control object must not exceed the load capacity
(4) This device is a water medium control device and cannot be used for other media controls.

Package list:

1 x switch for plastic water sensor