Arducam for Raspberry Pi Camera with Motorized Lens, Adjustable Focal Length for Monitoring 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable

Arducam for Raspberry Pi Camera with Motorized Lens, Adjustable Focal Length for Monitoring 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable

Hassle Free: Works as a native Raspberry Pi camera on Raspberry Pi 5/4/3B+/3 and more. NOTE: Before using the camera normally, you need to do some simple script configuration to make the camera work! Motorized Focus: See closer and easier than the fixed focus (1 m to infinity) lens, the minimum focal length is about 5CM, which is better to monitor the 3D printer nozzle and make you pay close attention to your creation. Focus Controllable: A camera focus control plugin has been developed to control an Arducam motorized focus camera. A Long Cable: 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the Raspberry Pi. Package Contents: 1pcs 5MP motorized focus camera module, 2pcs flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series, and manuals. Most 3D models take more than a few hours to print, so you may wish to leave the 3D printer at some point in the printing process. Using an Arducam camera to monitor 3D printing can make you pay close attention to your creation. Since most cameras are not made specifically for the use of 3D printing software, it is impossible to obtain proper support from the manufacturer. Fortunately, Arducam can help you solve all installation and setup problems.

Sensor: 5MP OV5647

- Still Picture: 2592×1944 Max

- IR sensitivity: Integral IR filter, visible light only

- Focus Type: Motorized focus

- Field of View: 54°×44° (H×V)

- Focusing Range: 2" to infinity

- Board Size: 25mm × 24mm

Package Including

- 1×5MP OV5647 camera board with motorized lens for Raspberry Pi

- 1×5.9"(15cm) flex ribbon cable for Raspberry Pi Model A&B series (Pi Zero cable not included)

- 1×39.4"(100cm) flex ribbon cable for Raspberry Pi Model A&B series (Pi Zero cable not included)

- 3×Manuals

NOTE

This camera module supports the autofocus features on Raspbian.