Project Patio 1-1/2" Wrought Iron Patio Furniture Feet Caps - Round Plastic Outdoor Metal Table and Chair Floor Protector Glide Replacement Parts (8

Project Patio 1-1/2" Wrought Iron Patio Furniture Feet Caps - Round Plastic Outdoor Metal Table and Chair Floor Protector Glide Replacement Parts (8

Compatibility: Designed exclusively for 1-1/2" inside diameter cups on wrought iron furniture legs. Please verify your measurements for accuracy before ordering. Assistance is available if needed Protection: Our patio chair feet will protect your furniture from damage and prevent marks, scratches, and rust on your flooring. Ideal for use on wood decks, stone, concrete, tiles, and more Noise: Enjoy a quieter outdoor space with our patio furniture glides. Your tables and chairs will slide with less effort without the annoying screeching sound when adjusting your furniture Durability: Our leg caps are made with thick, hard, all-weather plastic. They protect against UV damage and daily wear, ensuring your furniture remains protected no matter the season Installation: Before installing the wrought iron foot caps, ensure the cup area is clear of debris, rust, and dirt. Touch up any exposed metal. Use a rubber mallet for installation How to install: Items needed - Rubber mallet or rubber hammer: screwdriver or pliers. Tape is optional but can be helpful. 1 - Important. First, make sure your foot cup has an inner diameter of 1-1/2" 2 - Use whatever tool you can (screwdriver or pliers) to remove the old chair feet. 3 -After removing the old parts, clean the cup area well. Remove all dirt, debris, rust, etc. Use sandpaper if you need it. Touch up any exposed bare metal. 4 - Place your chair or table upside on a piece of cardboard or a towel to prevent scratching. 5 - To hit the glides in, you will need to use some force since they are friction fit. Use a rubber mallet or rubber hammer. Do not use a regular hammer, as this can crack the glide. 6 - Place the glide on top of the cup, so it is level. A piece of tape can be helpful to hold the glide in place if you are having trouble. 7 - Once the glide is in place, strike the glide directly in the middle and down into the cup. Start with a medium strike to get the glide set in the cup and confirm it is going in level. 8 - Once the glide is partially in the cup, you can continue to hit it the rest of the way. 9 - A ridge circling the outside of the plastic foot glide will be shaved off when inserted, ensuring a tight fit. 10 - Relax and enjoy the rest of the day!