SHUHANG 5 Pair Full Extension Drawer Slides 10 12 14 16 18 20 22 24 Inch 100 lb Load Capacity Side Mount Ball Bearing Rails Cabinet Dresser Glides

SHUHANG 5 Pair Full Extension Drawer Slides 10 12 14 16 18 20 22 24 Inch 100 lb Load Capacity Side Mount Ball Bearing Rails Cabinet Dresser Glides

【 Instructions 】 Qty: 5 pair. Length: 21.65"(550mm), full extension lengths: 43.23"(1098mm).Rail thickness: 0.5" (12.6mm). Rail width:45mm.There are 8 screws in the card box for each pair. Left installation gap: 0.5 inches (12.7mm), right installation gap: 0.5 inches (12.7mm). When inserting the drawer into the cabinet, push the outer rail's ball bearings to the top to align with the inner rail for proper installation. 【Double Anti-Rust Strength & Detachable】 - The drawer slide rail surface adopts electrophoretic blackening technology to isolate direct contact between water and air, effectively preventing the slide rail from oxidation and rusting, and extending the service life of the slide rail. The snap on design makes the slider easy to separate, making it convenient to disassemble and install the drawer slider. 【Drawer rails installation Precautions】— ①There is an installation video and an instruction for reference;②Ensure the size of selected slides ≤ the depth of drawer;③Reserve 1/2 inch of clearance for mounting on both sides;④The two glides must be mounted in parallel,or will damage the glides;⑤ Including the installation of screws. 【High Load Capacity and Durability】This heavy-duty drawer slide rail is made of 1.0mm thick cold-rolled steel, which is twice the thickness of a standard slide rail and can support up to 100 pounds -40 pounds higher than a regular slide rail. Whether it's kitchen cabinets, dressing tables, or office desks, they can perfectly adapt to drawer slides 【 Instructions 】 Qty: 5 pair. Length: 21.65"(550mm), full extension lengths: 43.23"(1098mm).Rail thickness: 0.5" (12.6mm). Rail width:45mm.There are 8 screws in the card box for each pair. Left installation gap: 0.5 inches (12.7mm), right installation gap: 0.5 inches (12.7mm). When inserting the drawer into the cabinet, push the outer rail's ball bearings to the top to align with the inner rail for proper installation.