Fiberglass Supply Depot 2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing,

Fiberglass Supply Depot 2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing,

Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy. This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy. 2# Density polyurethane flotation Foam 1 Gallon Kit; Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet. Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting. All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes

Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy.

2 Lb. density. Flotation range is 100-120 lbs./qt. and 480-600 lbs./gal.

The 2lb foam is recommended for void filling in nonstructural applications.

It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy.

This foam has been tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114 .

This foam is approximately 95-98% closed cell which resists absorbing water.