Walnut Wood Veneer 12" x 96" with Wood Backer 1/25" Thickness A Grade Quality

Walnut Wood Veneer 12" x 96" with Wood Backer 1/25" Thickness A Grade Quality

Model: Wood veneer Walnut 1' x 8' sheet roll flexible F/C, Wood Type: Walnut Brand: Walnut wood veneer 24" x 96" with wood backer F/C Veneer Type: Wood on Wood/2-Ply Veneer Cut: Plain Sliced Walnut American wood veneer sheet 12" x 96" with wood backer A grade x 1/25" total thickness. Pictures are representative of the product which will vary in color and grain since it is a natural product. Grain runs longer direction. Backer is Ash composite as shown in last photo. Walnut has a grayish look that goes more brown when finished as noted in wet and dry pictures. Some photos may show other sizes, customer projects and wet or finished veneer. Wood backer is sometimes preferred over paper backer since it is thicker. Also shown are wood veneer scraper tool, contact cement, and wood veneer trim knife that are helpful, but not necessary to use the product (sold separately). Ships rolled in long narrow box with application instructions. Other sizes, backers, raw veneer and edgebanding are available. Faster is usually available.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
About pictures
: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness
: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
: generally cut with a razor/box knife or similar tools and some type of straight edge.