Koch-Chemie Micro Cut & Finish Polishing Compound with Carnauba Wax - Permanent Removal of Holograms, Fine Scratches & Sanding Marks; Long Term

Koch-Chemie Micro Cut & Finish Polishing Compound with Carnauba Wax - Permanent Removal of Holograms, Fine Scratches & Sanding Marks; Long Term

Micro polishing compound with carnauba wax is economical and easy to remove. Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches, and sanding marks to P3000 grain size on all paint systems. Experience greatness in this effective scratch remover for vehicles. Simultaneous long-term sealing with a high degree of gloss and smoothness Holograms and fine scratches are eliminated mechanically and not covered over. Our car scratch remover gets the job done right! EXCELLENCE FOR EXPERTS -Since 1968, Koch‑Chemie stands for high-quality cleaning and care products in the fields of washing chemistry, vehicle preparation, workshops, and industry. MICRO CUT & FINISH P3.01 Micro Polishing Compound with Carnauba Wax is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches, and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with a high degree of gloss and smoothness. Through the use of highly specialized, extremely homogeneous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and NOT, which is often the case, covered over. MICRO CUT & FINISH is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. CUT: 3.2 | GLOSS: 9.5. Areas Of Use: Paintwork of cars, commercial vehicles, motorcycles, etc. Recommendations For Use: For optimum results, we recommend using Koch-Chemie's MICRO CUT (Purple) Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively, a rotary polisher can be used in combination with our MICRO CUT Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterward, polish with low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues, we recommend The Rag Company's Eagle Edgeless or Edgeless 300 or Edgeless 365 towels. Warnings: Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Protect against frost and excessive heat. Notice: This product information can advise you only without obligation. Liability on the part of Koch-Chemie cannot be derived. Please check whether the product is suitable for your application.