HECERE Handheld 125khz Copier RFID Smart 125khz Card Duplicator Used for T5577 or EM4305+5pcs T5577 Keychains +5 T5577 Cards

HECERE Handheld 125khz Copier RFID Smart 125khz Card Duplicator Used for T5577 or EM4305+5pcs T5577 Keychains +5 T5577 Cards

1.The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychain，Requirements 2 knots 1.5V AAA batteries 2.The product portfolio is based on the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. The combined products are compatible with the low-frequency of T5577 or hidden cards，Small size,light weight(56g),convenient for flow of work, on-site copy 3.Purchase Notice: If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase,The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards. 4.Can be reused, proximity cards can use an unlimited number of times，Please note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card. 5.Attention: Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please write low-frequency instructions from your device before replacing it, Replicator features is super,forced those cards which can only copy one time to be used many times in the host.
6.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.，Requirements 2 knots 1.5V AAA batteries. 8.Compatibility with Frequency: Our Access Control Card Duplicator is only compatible with 125KHz RFID cards. It cannot duplicate 13.56MHz cards. Please ensure that the card you wish to duplicate is within the supported frequency range before purchasing 9.Encryption Limitations: This duplicator is designed to clone unlocked or non-encrypted 125KHz cards only. It cannot copy encrypted cards. If your access control cards are encrypted, this product will not work for duplication. Notice before purchase: This is an RFID 125kHz low-frequency replicator combination, and our combination is based on the T5577 chip, The RFID replicator is compatible with all low-frequency RFID 125kHz smart products, and the combined product is compatible with the low-frequency of T5577 or hidden cards, If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase, Please note to buyers. Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please use your device's low-frequency instructions to write it before replacing your device. Read:Put the inductive proximity card in the induction area and hold the read key(left one),the buzzer will sound emitted by bit, the green on, successful reader. If there is no reflection but only the power light is blinking, the reader fail. Copy: After successful read,put the blank card in the induction area and hold the copy key(right one), the buzzer sound emitted by bit,yellow light on,indicating that the copy --- successful. If there is no reflection but only the power light is blinking, the copy fails. The machine features Requirements 2 knots 1.5V AAA batteries Small size,light weight(56g),convenient for flow of work, on-site copy The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards. Can be reused, proximity cards can use an unlimited number of times Replicator features is super, forced those cards which can only copy one time to be used many times in the host