1 AWG 19-Stranded THHN White Copper Building Wire (50ft Cut)

1 AWG 19-Stranded THHN White Copper Building Wire (50ft Cut)

#1 AWG Commercial Wiring for Outlets, Switches and Other Loads Contains Copper (Cu) Conductors Made with Annealed (Soft), Compressed Copper Can be Used in Wet or Dry Locations. Insulation is High Heat and Moisture Resistant Polyvinyl Chloride (PVC). Jacket is Abrasion, Moisture, Gasoline, and Oil Resistant Nylon Has an Allowable Ampacity of: 110 Amps at 60 Degrees Celsius, 130 Amps at 75 Degrees Celsius, and 150 Amps at 90 degrees Celsius

Applications:
Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). 4 AWG THHN-THWN-2 is permitted for new construction or rewiring for 600-volt applications. Applications requiring Type THHN or THWN-2, the conductor is appropriate for use in wet or dry locations at temperatures not to exceed 90°C or not to exceed 75°C in oil or coolants. Applications requiring Type MTW conductor is appropriate for use in dry locations at 90°C, or not to exceed 60°C in wet locations or where exposed to oils or coolants. Applications requiring Type AWM conductor is appropriate for use at temperatures to not exceed 105°C in dry locations.

Also Known As:
Copper wire, THWN, building wire, hook up wire, conduit wire, bathtub wire, lighting wire, nylon copper wire, construction cable, etc...

Features
Nylon outer jacket for easy pulling. VW-1 rated 14 AWG - 8 AWG. All sizes are rated gasoline and oil-resistant II.

Jacket:
A tough, polyamide, Nylon outer covering per UL-1063 and UL-83.

Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
NEMA WC70/ICEA S-95-658
Institute of Electrical and Electronics Engineers

Construction:
Insulation:Color-coded Polyvinyl Chloride (PVC), heat and moisture-resistant, flame-retardant compound per UL-1063 and UL-8

Specifications:
Size:1 AWG
Number of Strands:19
Cross Section Area (mm2):42.40
PVC Insulation Thickness (Conductor):1.270 mm / 0.050 inches
Nylon Jacket Thickness:0.180 mm / 0.007 inches
Outside Diameter:11.05 mm / 0.435 inches
Weight:0.316 lbs per ft
Alowable Ampacity:110 Amps at 60℃ / 130 Amps at 75℃ / 150 Amps at 90℃