QuestMark 2125 Quick Setting Epoxy Concrete Floor Patch, 2 Gallon, Dark Gray - Rapid Curing Repair for Cracks, Holes and Pits in Industrial Cement

QuestMark 2125 Quick Setting Epoxy Concrete Floor Patch, 2 Gallon, Dark Gray - Rapid Curing Repair for Cracks, Holes and Pits in Industrial Cement

Designed for situations where a rapid setting patch is necessary and temperatures are above freezing (See Specification Sheet for details). Due to fast setting properties, this product can be used when temperatures are above 30 degrees F, such as heavy traffic areas, walkways, cold storage areas and support bases for tanks. At 70 degrees F Pot life of 8-15 minutes; May be recoated in 2-4 hours; Light foot traffic in 4-6 hours (24 hours at 30 degrees F); Full cure (heavy traffic) in 2-5 days. Recommended thickness of 1/8" to 1/4". At this thickness, our 5 Gallon unit covers approximately 20.58 sq ft. This system consists of resin, hardener and aggregate components. It is proudly manufactured in the USA. QuestMark 2125 Quick Setting Epoxy Concrete Floor Patch and Resurfacer is a 3 component, 100% solids epoxy mortar designed for patching and resurfacing high traffic locations where temperatures are above freezing and a rapid setting patch is necessary. It has superior wear characteristics, and is an excellent choice for high traffic areas, walkways, chillers, cold storage areas, and support bases for tanks.


It does not require a primer or topcoat to be used. The product contains no VOC content. Available in 2 sizes and 6 colors.


Directions for Use:

• Clean repair area by removing all dirt, oil, dust or other debris.
• Ensure floor is dry prior to application.
• Mix Parts A and B together in an over-sized container until streak free.
• Add sand mixture and stir to a mortar consistency.
• Trowel on mixture at 1/8” to 1/4" thickness using a hand trowel or other suitable equipment.
• For cleanup, use xylol or similar product.
• See Technical Data Sheet for cure schedule.