FYSETC Ender 3 Max Solid Bed Mounts - CR10 V2 V3 Silicone Spacers - 3D Printer Leveling Spring Replacement Accessories: 3x25mm+1x23mm Heated Bed

FYSETC Ender 3 Max Solid Bed Mounts - CR10 V2 V3 Silicone Spacers - 3D Printer Leveling Spring Replacement Accessories: 3x25mm+1x23mm Heated Bed

1. Mandatory Upgrade for FDM printers: New upgraded 3d printing leveling tool, a great replacement for the original yellow springs on 3D printer. The bed stays level, improve your printing quality, no need to re-adjust after every three or four prints. This heat-bed silicone leveling helps cut back any vibrations compared to stiff plastic. Please Note: Automatic leveling sensor/ABL BL touch is need. Before install, you need to print two firmwares, search 4349082 on thingives 2. Easy install, much more stable table: These installed really easily, and made a HUGE difference over the stock springs, 10 minutes to change out for the stock springs. Just don't stress your wires. Once you feel a bit of tension, you just give them a few turns to snug the table, then level it out. You don't have to re-leveled the bed (well, autolevel works every print) in about 100 prints and still no need at all as these hold the bed much better than the springs. Your set levels remain! 3. Application Scope: This taller silicone bed spacer kit is compatible with Ender 3 Max, CR10 V2 / V3 / Max, Sovo SV01 SV02. NOT for CR10s, Ender 3 S1 pro or Ender 6 which needs 4*18mm. Not directly replacement on CR10 S4 or S5 with the z stop in stock position. From other CR10 S5 machine usage, in order to make up for the lack of "Printed Firmware" with two 3/8" fender washers for the short pillar. If need drop-in replacement for 410mm or 510mm bed, please feel free to contact us 4. Package Include: 25mm 3d printer Heatbed leveling column silicone x 3pcs, 16mm heat bed leveling spring replacement part x 1pcs, (3x 0.98inch+1x 0.9inch). These are great, provides for a much more stable bed. One of the bushings will be shorter than the others. This one is for the left rear corner. It's shorter to account for the bed wire support. If for CR10/Ender 3 v2/Ender 3 Pro/Ender 3 S1/Ender 5 Pro, you need another size 3*18mm+1*16mm (Asin:B07MH4JQB8 or B07M66KJNX) at our shop 5. Advantages: High-quality silicone material, effective shock absorption, not easy to deformation. High temperature resistance, compared to the spring, its contact surface is larger with better stability, good elasticity, good fatigue resistance, shock absorption, can be freely adjusted These spacers will improve your printer bed stability, increase the print quality, reduce how often need to level the bed, and how often the level adjusters get loose. They are easy to install and not permanent if you want to go back to springs. it is one of the best improvements made to the printer. It is stable and does not shake when used, better to keep your 3D printer leveled.

Model: Tips: Usually a printer requires 4 leveling silicone columns. The package includes 3 high and 1 short silicone leveling column, brown

Feature: Assist 3d printer leveling

Material: Silicone

Silicone: Heat-resistant and pressure-resistant

Height: High 0.98 inch(25mm), Short 0.9 inch(23mm)

Diameter: ID 0.16 inch(4mm)

Package Includes:

3x high silicone leveling column, brown

1x short silicone leveling column,brown