Maple Curly Figured Tiger Wood Veneer 24" x 48" with PSA Adhesive AA Grade

Maple Curly Figured Tiger Wood Veneer 24" x 48" with PSA Adhesive AA Grade

Model: Peel and stick 3M liner self adhesive sticky back, Wood Type: Maple Curly Brand: Curly Figured Tiger Maple wood veneer sheet PSA Veneer Type: Paper Backed Veneer Cut: Plain Sliced Curly Tiger Maple wood veneer 24" x 48" with peel and stick adhesive pressure sensitive with 3M adhesive PSA 2' x 4' x 1/40" thickness AA second best grade considered above average (50-75% figure approximate). Grain runs longer direction and figure runs across the grain from side to side. Simply peel off the backer and stick it on a well-prepared surface and apply pressure. Pictures are representative of the actual product which will vary in color and grain since this is a natural product. Some photos may show other sizes, customer projects and wet or finished veneer. Ships rolled in long narrow box with application instructions. Very popular and successful product. Other sizes, backers, raw veneer and edgebanding are available. Faster available.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
About pictures
: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness
: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
: Paper-backed and wood-backed veneers are generally applied with contact c