10pcs UV Resin Super Fast Curing Crystal Clear High Transparency Resin Crafts DIY Jewelry Making Kit with Mini Foldable UV Lamp for Beginners Gifts

10pcs UV Resin Super Fast Curing Crystal Clear High Transparency Resin Crafts DIY Jewelry Making Kit with Mini Foldable UV Lamp for Beginners Gifts

★★★ WHAT'S NEW: Based on customers' feedbacks and several developments, we proudly introduced our new developed UV resin, which has even better transparency, lower viscosity, and most importantly, much faster curing. ★★★ FASTER CURING: Can be cured completely hard under a 6W UV lamp in 2 minutes (90 seconds on the top, if possible, flip over and 30 seconds on the back) -- less time and lower wattage needed for curing. The resin can also be cured with direct sunlight. Important: After curing, please allow the cured UV resin to cool for 1-2 minutes before touching it with your hands without gloves. ★★★ HIGHER QUALITY: Undoubtedly excellent transparency, 100% crystal clear and non-yellowing, with hard glassy finish and uniform gloss. Less shrinking, less bubbles, lower viscosity. ★★★ EASIER TO USE: Ready to use, no need to measure the ratio or mix. This product comes with a bottle cap with a pointed mouth for easy pouring and control. Perfectly suitable for resin jewelry making and crafts decorations, resin pour art, paint, garment accessories and other crafting and DIY ideas. ★★★ SAFE FORMULA: No harsh chemicals, non-carcinogenic, cruelty free materials, safe and reliable. Note: If skin contact, please clean with alcohol first, then wash with running water and soap. Children should use this product under the supervision of an adult. Needs to be stored in a cool, dry place, protected from light. ★★★ WIDELY USED: Can be used for jewelry making, crafts decorations, casting and coating, garment accessories, cast figurines, object encapsulation and resin paintings, etc. It can also be mixed with mica powder, colorants, glitter to get colorful finishes. Packing List:
10x VidaRosa New Upgrade UV Resin (Net: 30ml)
1x Mini Foldable UV Lamp with USB Cable

Instruction for UV lamp:
Plug and use. Press the switch button once to set 45 seconds, twice to set 1 minute.

Instructions:
1. Directly pour the resin in the mold or bezel.
2. Add colorants, glitter, dried flowers or anything you want in the resin using a toothpick or tweezers.
3. Cure both front and back sides of the resin with UV lamp or sunlight.
4. After curing, leave the resin to cool down for a few minutes instead of touching it inmediately with your hands.
Tips: It would be better to cure the resin in layers of 3-5mm each time instead of curing it all in once, if large amount of resin is needed for the project.

How to avoid bubbles:
1. Before using the resin, place the bottle upside down for a few minutes.
2. Slowly squeeze the bottle instead of pouring the resin too quickly.
3. Use a toothpick to move the bubbles to the surface, then poke them or use a heat gun or a lighter to eliminate them with the heat (quickly).

Attention:
-Children should use this product under the supervision of an adult.
-If skin contact, please first clean with alcohol, then wash the skin with running water.
-Avoid contact with eyes. If eye contact, rinse immediately with plenty of running water.
-Store the product in a cool, dry place, protected from light.
-Please use it within one year after opening.