AceCrew Industrial Brass Electric Solenoid Valve 1/2 inch NPT 110V, 120V AC Normally Open- flow control valve for gas, air & fluid

AceCrew Industrial Brass Electric Solenoid Valve 1/2 inch NPT 110V, 120V AC Normally Open- flow control valve for gas, air & fluid

AceCrew Industrial grade Electric Solenoid Valve Normally Open Size 1/2 inch NPT thread ,Voltage AC 110V, 120V Brass inlet & outlet NPT Thread , easy to install with 2-way 2-position direct lift diaphragm Normally Open operation for gas and liquid flow control. Valve will close when energized. Suitable for operation systems that requires constant flow of fluid, gas & water in irrigation , gas activated and automated equipment , HVAC systems Flow rate Cv = 4.5 ; Unidirectional (indication on brass body) Pipe Size : 1/2" NPT female (14 TPI) . Orifice Diameter : 19/32" (15 mm) Seal/Diaphragm : NBR (Buna-N, Perbunan, and Nitrile rubber) Current : 0.2 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable) Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline. Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C). Weight of solenoid valve : 2 lbs AceCrew Solenoid valves and Accessories
1/2 Inch 110-120 VAC Normally Open Brass Solenoid Valve
Individually tested in factory


Highlight:
-Body Material: Forged high-quality solid brass
-Operation Mode : normally open
-Pipe Size : 1/2" NPT
-Voltage: 110-120 VAC
-Diaphragm/Seal Material: NBR
-Applications: Industrial grade highly reliable
Mechanical :
-Operation Type: 2-way 2-position direct lift diaphragm
-Operation Mode: Normally open (valve closes when coil is energized)
- Pipe Size: 1/2" NPT female (14 TPI)
-Orifice Diameter : 19/32" (15 mm)
-Flow Rate: Cv = 4.5
-Flow Direction: Unidirectional (follow the arrow on valve body)
-Media: Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do Not use with gasoline)
-Operating Pressure Differential: 0-145 psi (0-1 MPa, gravity-feed capable)
-Operating Temperature :15-125 °F (-10~50 °C)
-Media Temperature : 15-180 °F (-10~80 °C)
-Dimensions :See product diagrams
-Weight :2 lb
Electrical:
-Voltage: 110-120 VAC
-Current: 0.2 Amp
-Wattage: 24 Watt
- Coil: Copper wire in resin-molded casing
-Connectors: DIN
Material :
-Body: Brass
- Insert : Stainless steel (plunger, spring, etc.)
-Seal: NBR (aka Buna-N, Perbunan, and nitrile rubber)
-Diaphragm :NBR (fiber-reinforced)
Additional
Available :Coil Voltages 12VDC, 24VDC, 24VAC, 110/120VAC, and 220/240VAC
Available Port Sizes : 1/4", 3/8", 1/2", 3/4", and 1"
Available Types of Operation : Normally Closed and Normally Open
Replacement/Spare Parts : Coil