Electric Soldering Iron Kit, 30W Use Tin Suction Sucker Pen Desoldering Soldering Tool(US Plug 110V)

Electric Soldering Iron Kit, 30W Use Tin Suction Sucker Pen Desoldering Soldering Tool(US Plug 110V)

UNIQUE STRUCTURE: The electric soldering iron kit is made of materials, which is more . EASY TO CARRY - Small size, light weight and easy operation.You can carry it with you. APPLICATION RANGE: This tin can be used as a electric soldering iron. It is an indispensable tool for national , scientific research, communication, aerospace, computer, radio, television, electronic professional maintenance personnel and the majority of radio enthusiasts. EASY TO OPERATE - It is convenient to remove the components to be replaced from the board without damaging the components and the board. ELECTRONIC SOLDERING - Can be used to replace integrated circuits, multi-pin switches, etc. Specification:
Item Type: Soldering Iron
Material: Plastic Handle + Stainless Steel Tube
Power: 30W
Temperature Adjustment Range: 400°C
Optional Voltage: US Plug 110V

Package List:
1 * Soldering Iron
1 * Nozzle
1 * PCB Needle
Instructions:
1. Turn on the power and warm up for 3-5 minutes.
2. Push the piston handle down and the front end of the suction soldering iron nozzle is aligned with the solder joint of the component to be removed. After the solder is , press the control button, and the solder is sucked into the intake cylinder.
3. The suction device is equipped with two nozzles with different diameters, which can be selected according to the thickness of the component leads.
4. When welding, the same as using an electric soldering iron
5. When disassembling the air cylinder, press the upper end of the air cylinder downward according to the direction of the arrow. When the air cylinder and the handle are pulled apart, the air cylinder can be separated. When the suction nozzle is removed, the suction nozzle is rotated counterclockwise to the suction nozzle. Removal considerations
6. Check if the voltage used is consistent, too high or too low voltage is not conducive to use
7. Before use, tighten the suction nozzle and the air cylinder to prevent air leakage, otherwise it will affect the tin absorption effect.
8. Frequently remove the solder impurities entering the nozzle and the gas cylinder, and add a little oil to the piston.
9. After each use, push the piston 3-4 times to remove the solder in the straw, so that the nozzle and the straw are unblocked for the next use.
10. After the suction device is energized, it is strictly forbidden to install and disassemble its electric parts.