TICONN 250 Pcs Solder Seal Wire Connectors, Heat Shrink Butt Connectors, Waterproof and Insulated Electrical Wire Terminals, Butt Splice (250PCS)

TICONN 250 Pcs Solder Seal Wire Connectors, Heat Shrink Butt Connectors, Waterproof and Insulated Electrical Wire Terminals, Butt Splice (250PCS)

✔️ EASY AND FAST PROCESS: All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver ✔️ WATERPROOF AND INSULATION: Dual-walled design - Outside Polyolefin tubing provides insulation and improves pullout strength; Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal ✔️ STAY ORGANIZED: Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application. The connector assortment includes white (AWG 26 – 24), red (AWG 22 – 18), blue (AWG 16 – 14) and yellow (AWG 12 – 10) solder seal connectors that can be used on wire AWG from 26 to 10. ✔️ WIDE APPLICATIONS: Shrinking ratio: 2:1. Ideal used for Automotive, Boat, Marine and other Outdoor Applications ✔️ TICONN BRAND QUALITY COMMITMENT – We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us.

Easiest wire connector on the market

TICONN solder seal connectors will make your wire connection waterproof just in seconds;

also it applies some mechanical damage protection and prevents wire corrosion!

Our connectors are an irreplaceable tool for fast, reliable and effective wire connection in any place and are appreciated by handymen all over the world!

Select the proper size connector for the wires, stripped wires.

Insert the stripped wires into the connector.

Apply heat evenly to the connector from the 2 ends first until tubing shrinks and the adhesive flows, then continuously apply heat evenly until solder sleeve melt and seal.

Note:

For best result, please use a hot air gun and rotate the connector to evenly apply heat.

Please raise the temperature from low to high gradually when you use the hot air gun to heat the wire connector.

Please DO NOT set the high temperature at the beginning, or the surface of connector will be over-heated, which will lead to the tube melt while the solder ring still not melt.

Keep the hot air gun at the proper distance. Don't get too close.

Technical Specifications:

Shrinkage ratio 2:1

Minimum shrink temperature: 80°C

Minimum temperature for solder to melt: 138°C

Operating temperature :-55℃ - 125℃

Waterproof Class: IP 67