Muzzys (SET OF TWO) Tail Light Whip Power Harness Adapter Pigtail Jumper FITS: 2014-2025 Polaris RZR RANGER GENERAL 900 1000 XP Turbo RS1 S Trail Etc.

Muzzys (SET OF TWO) Tail Light Whip Power Harness Adapter Pigtail Jumper FITS: 2014-2025 Polaris RZR RANGER GENERAL 900 1000 XP Turbo RS1 S Trail Etc.

(Set of TWO Harnesses so you can power TWO whips) EASY TO INSTALL- Unplug the stock harness at either TAIL LIGHT and plug our harness inline and run the wires to your LED whip light or whatever 12v accessory you'd like to power. See photo for wiring descriptions. FITS: 2014-2025 GENERAL, RANGER, RZR 900/1000, XP 1000, XP Turbo, RS1, S, Trail, Etc.... Connect plugs directly to the tail light plug, not to the main plug that feeds the lights along the bed. IT WILL NOT WORK IF YOU PLUG IT IN ANYWHERE OTHER THAN DIRECTLY AT EITHER TAIL LIGHT. NO CUTTING REQUIRED- Plug and Play into your existing harness. Use the included splices to hook up the wires to your LED whip or other 12v accessory. 3 WIRE OUTPUT- Yellow to running light, red to brake light, black to ground. Yellow will provide 12v any time the key is on. Red will only provide 12v when the brake pedal is pressed. WIRING- Use the yellow wire to power accessories such as whips and license plate lights. Use the red wire to power additional brake lights. Use the black ground for all applications. THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. IT WILL FIT AT ANOTHER CONNECTOR ALONG THE BED BUT THIS IS NOT WHERE IT GOES. You can use this at either tail light and can use two per vehicle if you want to power a whip on both sides. This listing includes two harnesses. One for each side of your RZR so you can power two whips individually. WIRING INSTRUCTIONS: The red and yellow wires are both power wires. You only need to use ONE of them. You can cut off the unused one and wrap the end in electrical tape. Yellow will provide 12v any time the key is on. Red will only provide 12v when the brake pedal is pressed. Use the yellow wire to power accessories such as whips and license plate lights. Use the red wire to power additional brake lights. Use the black ground for all applications. THIS MUST BE PLUGGED IN DIRECTLY AT THE TAIL LIGHT. IT WILL NOT WORK PLUGGED IN ANYWHERE ELSE. IT WILL FIT AT ANOTHER CONNECTOR ALONG THE BED BUT THIS IS NOT WHERE IT GOES.