uxcell 25W 15 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 5 Pcs

uxcell 25W 15 Ohm 5% Aluminum Housing Resistor Screw Tap Chassis Mounted Aluminum Case Wirewound Resistor Load Resistors Gold Tone 5 Pcs

25 Watt and 15 Ohm, 5% tolerance. Size: 28mm x 27mm x 14mm, total lenght with connector: 50mm. Aluminum Housed. An insulated cover on the wounded wires would suppress the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case. This 25W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built. Wire Wound Resistor owns high reliability and accuracy. Moreover, it was used for various application because of the wide resistance range. Chassis mounted with Screws, Board length 1.1 inches(28mm) with two 3.5mm mounting hole, and 2 terminals for a connection. Reliable. Problems like the flush LED and ring doorbell would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc. 25 Watt 12 Ohm Aluminum Case Wirewound Resistor with 5% Tolerance
Power: 25W
Resistance: 15 ohm
Tolerance: 5%
Connection Type: Rods
Board Length: 28mm
Mounting Hole Diameter: 3.5mm
Distance Between Mounting Hole: 18mm
Materials: Nickel alloys Wire Wound Resistor with Aluminum Case
Color: Gold
Package Content: 5 pcs 25W 15ohm Aluminum Resistor
Suggestion:
a. The load resistor will get huge hot, please don't touch it when the resistor is working.Because alumnium resistor is a braking device which transfers Electric energy to Thermal energy.This is a normal physical phenomenon.
b. The load resistor should be mounted on metal board, not on flammable board such as plastic board,rubber,paper,wood and etc.
c. We recommend a 30%-50% increase in rated power based on your actual load power and add a heat sink device when it is necessary.

If you choose a 30% increase in rated power, you must add a heat sink device.
If you choose a 50% increase in rated power, you can add a heat sink device for the best use of its performance.

d. Not recommend to use it for Automotive repair or refit unless you have professional knowledge.