Walnut Quarter Cut Composite Wood Veneer 48" x 96" on Paper Backer 1/40" # 580

Walnut Quarter Cut Composite Wood Veneer 48" x 96" on Paper Backer 1/40" # 580

Model: Walnut Quarter Cut Rift grain flexible veneer wood, Wood Type: Walnut Brand: Quartered Walnut composite wood veneer sheet roll Veneer Type: Paper Backed Veneer Cut: Quarter Cut Walnut Quarter Cut composite wood veneer sheet 48" x 96" with paper backer 4' x 8' x 1/40" thickness. Composite wood has been dyed and cut to make each sheet clean in appearance and consistent. Natural defects or markings are removed from the wood and the grain is straighter than natural veneer. Some photos may show other sizes, customer projects, helpful accessory products (sold separately) and wet or finished veneer. Product is unfinished. Grain runs longer direction. Ships rolled in long narrow box with application instructions. Other sizes, backers and raw veneer are available. Product code # 580. Finishes very well.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My Store: JSO Wood Products
Other sizes and unbacked veneer may be available.
About pictures
: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness
: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is ap