SUNLU Silk PLA Plus Filament 4kg Bundle, Shiny Silk Surface PLA+ 3D Printer Filament 1.75mm ±0.02mm, Glossy 3D Printing Filament,Good Vacuum Packaging

SUNLU Silk PLA Plus Filament 4kg Bundle, Shiny Silk Surface PLA+ 3D Printer Filament 1.75mm ±0.02mm, Glossy 3D Printing Filament,Good Vacuum Packaging

Shiny Silky Surface: SUNLU Silk filament has a very shiny smooth surface, the reflective effect is good, and the color is bright, which is very suitable for 3D printing art.

SUNLU silk PLA filament 1.75mm has good layer adhesion, very easy to use, friendly to beginners, no clogs, no bubbles, no tangles.

Recommend Settings

• Nozzle/Extrusion temperature: 200-230℃;
• Bed/Platform temperature of 60-80℃;
• Printing speed: 30-600mm/s;
• These settings are for 0.4mm nozzle, it may be different with different diameters nozzle.

3 Steps Checking: Why is the Filament Not Sticking to the build bed?

• Temperature Checking - Please check the temperature(bed and nozzle) settings before printing and set it suitable;
• Building Bed Checking - Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed;
• Speed Checking - Please check if the printing speed of the first layer is too fast.

Notes

• Please insert the filament into the side holes after use to avoid tangles;
• Please store the 3D printer filament in a sealed bag or box after using it.