GEMEK 50ft SMA Male to SMA Female Pure Copper Cable, Low Loss S-MR400 Extension Coaxial - Antenna Lead Extender for 3G 4G 5G 6G LTE ADS-B Ham GPS WiFi

GEMEK 50ft SMA Male to SMA Female Pure Copper Cable, Low Loss S-MR400 Extension Coaxial - Antenna Lead Extender for 3G 4G 5G 6G LTE ADS-B Ham GPS WiFi

✔Connector: All-copper SMA Male to SMA Female adapter. (Note: Not RP-SMA Cable). ✔Connect from SMA Equipment to SMA Female Antennas, receivers, meters, radio transmitters and WiFi Signal Booster Repeater. ✔50 feet(16 Meters) Low-Loss S-LMR400 Size Coax, Impedance: 50 ohm. S-MR400 offers a significantly larger center conductor and supports better signal retention for longer cable runs and higher frequency use. ✔Double Shielded Coax extension cable assemblies are constructed with top quality extremely low-loss S-MR400 cable and gold plated connectors. High frequency low loss and low impedance, heat Shrink on Both Ends. ✔Compatible with all SMA-based equipment including modems and routers & WiFi Signal Booster Repeater from Cisco, Digi, Cradlepoint, Proxicast, Pepwave, Sierra Wireless, Sixnet/Red Lion and many others. GEMEK Double shielded coaxial extension cable made of low loss S-LMR400 sized pure copper coax cable.


Specifications:

- Connector 1: SMA Male plug 50 ohm
- Connector 2: SMA Female plug 50 ohm
- Length: 50 feet(16 Meters)
- Impedance: 50 Ohm
- Coax: Double shielded Low-loss S-MR400 size (10.3mm/0.4 inch diameter)
- Operating temperature : -20°C ~ +70°C.
- Minimum bending radius is only 2.44 inches.
- 90 degree bends in one inch or less without loss.

S-LMR-400：
S-MR400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use,
and provides superior performance for HF/VHF/UHF installation up to 250 feet.
S-MR400 Coax is the same size as RG-8U or RG-213 cable, 0.405 inches in diameter.
A larger cable means a much larger center conductor and supports better signal retention for higher frequency use.
S-MR400 assemblies are a drop-in replacement for RG-8/9913 Air-Dielectric type Cable and are ideal for Jumper Assemblies in Wireless Communications Systems,
Short Antenna Feeder runs, and any application requiring an easily routed, low loss RF cable.

Application:
Use to connect SMA radio sources such as modem, routers, WiFi Signal Booster Repeater, etc.
to the female SMA connector found on many external fixed mount antennas (e.g. fiberglass omni-directional, directional panel, sector), receivers, meters and radio transmitters.

NOTICE :
NOT for use with 75 Ohm TV video devices.
The is SMA Male to SMA Feamel Cable, Not RP-SMA Cable

Package List: 1 x SMA Male to SMA Female Low Loss Coaxial Cable (As the Picture Shown)