Rocketarium Daedalus 2-Stage Flying Model Rocket Kit. RK-1003

Rocketarium Daedalus 2-Stage Flying Model Rocket Kit. RK-1003

2-Stage High-Altitude Rocket. Uses D, E Estes Motors (not included) Comes with Self-adhesive Decals and Ejection Baffle (no wadding required), Laser-cut fins and centering rings, plastic nose cone, 18" plastic parachute Check out the assembly video and instructions (below) Intermediate Assembly Skills Required. You will need Wood Glue, Ruler, Pencil, Hobby Knife, Sanding Paper. Primer, Paint and Masking tape required if you want to paint your rocket Requries Launch Controller, Pad with 3/16" Launch Rod and Rocket Engines to launch. Daedalus is a two-stage model rocket kit with self-adhesive decals, pre-cut fins, laser-cut plywood centering rings, plastic nose cone, and a 18" plastic parachute. Assembled, the Daedalus stands more than three feet tall and will reach 2000 ft on 2 E motors. This rocket requires 3/16" Launch Rod and compatible launch system. Requires (not included) Assembly, Wood glue, hobby knife, sandpaper, masking tape, primer and paint needed to build this rocket. Launch system with 3/16" Launch rod, Launch Controller and Rocket Motors needed to launch this rocket and are not included. The following rocket motors can be used: D12-0 with D12-5, or E12-0 with E12-6