Hantek 3in1 Handheld Oscilloscope, 40MHz 2CH Automatic Digital Oscilloscope, Multimeter, Waveform Generator with LCD Color Screen, Chargeable with

Hantek 3in1 Handheld Oscilloscope, 40MHz 2CH Automatic Digital Oscilloscope, Multimeter, Waveform Generator with LCD Color Screen, Chargeable with

【3 in 1 Automotive Oscilloscope】Oscilloscope, multimeter, and waveform generator all in one. Features automatic frequency and amplitude measurements, cursor measurement auto-calibration waveform recording functions, and overload protection. 【Multifunctional Handheld Oscilloscope】40MHz bandwidth with 2CH channels. 250MSa/s sampling rate for Single-channel and 125MSa/s for Dual-channel. 10mV-10V vertical resolution for waveform generator. Competent in voltage, current, resistance, diode, capacitance, and continuity tests of AC/DC. 【Type-C Charging】 Ultra Low Power + Type C Data Transfer/Charging Interface; Be able to recharged by 5V/2A large current or ordinary computer USB port,allow while charging, very convenient and handy; Type C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months. 【User-friendly Interface】Versatile functions with an easy-to-read display and intuitive controls. Switch to different modes and functions swiftly with simple buttons. Automatic adjustment with Auto Set Key, which can adjust the horizontal and vertical scales as well as trigger coupling, type, position, slope, level, and mode automatically. 【Solid Hardware】Equipped with a high-resolution LCD screen that stays clear under bright light. The one-piece shell can resist strong impacts and heat. The retractable stand allows convenient placement in any working scene. Oscilloscope Functions:
Horizontal
Sample Rate Range: 250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform Interpolation: (sin x)/x
Record Length: Max. 6K for single-channel; 3K samples per dual-channel
SEC/DIV Range: 5ns/div~500s/div 1, 2, 5 sequence
Vertical
A/D Converter: 8-bit resolution,each channel sampled simultaneously
VOLTS/DIV Range: 10mV/div~10V/divat input BNC
Bandwidth Limit, typical: 20MHz
Low Frequency Response (-3db): ≤10Hz at BNC
Rise Time at BNC, typical: ≤5ns
DC Gain Accuracy: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
Note: Bandwidth reduced to 6MHz when using a 1X probe.
Acquisition
Acquisition Modes: Normal
Trigger
Type: Edge
Mode: Auto, Normal, single
Level: ±4 divisions from center of screen
Trigger Level Accuracy: 0.2div X volts/div within ±4 divisions from center of screen
Slope: Rising, Falling, Rising & Falling
Source: CH1/CH2

Input
Coupling: DC, AC or GND
Input Impedance,DC coupled: 25pF±3 pF, 1MΩ±2%
Probe Attenuation: 1X, 10X
Supported Probe Attenuation Factors: 1X, 10X, 100X, 1000X
Maximum Input Voltage: 150VRMS
Measurement
CursorVoltage difference between cursors: △V; Time difference between cursors: △T
Automatic Measurements: Frequency, Amplitude
Arbitrary Waveform Generator Mode
Waveform Frequency: Sine: 1Hz~25MHz; Square: 1Hz~10MHz; Ramp: 1Hz~1MHz; EXP: 1Hz~5MHz
Sampling: 250MSa/s
Amplitude: 2.5Vpp(50Ω): 5Vpp(High impedance)
Frequency Resolution: 0.10%
Channel: 1CH waveform output
Waveform Depth: 512Sa
Vertical Resolution: 12 bit
Output Impedance: 50 Ω

Standard Accessories:
1 * 3-in-1 Oscilloscope
2 * Clip Probes
1 * Test Probe
1 * Power Adapter
1 * USB Type-C Charging Cable
1 * Multimeter Probe
1 * Storage Bag and Manufacturer Certificate