Beduan Push to Connect Air Fitting, 12mm Tube OD Pneumatic Tee Union Fitting Push Lock(Pack of 10)

Beduan Push to Connect Air Fitting, 12mm Tube OD Pneumatic Tee Union Fitting Push Lock(Pack of 10)

Type: Push in fittings, T-Type. Tube size: 12mm tube OD Body Material: Plastic (PET). Applicable Tube: PU/PE/PA/PE/PVC Pressure Range: 0-145Psi (0-1Mpa). Max Pressure: 217Psi (1.5Mpa). Temperature Range: 0-60°C | 32～140°F. Fluid Admitted: Air Vacuum Water (no freezing). Easy to install, just need one step to finish installation. Round O-Rings: It offers a 360° rotation, even after the installation of tubing, 360° rotation could operate though.

Product Parameter

Size：12mm OD

Shape: T Shape

Material: Plastic

Working Temperature:32～140°F

Fluid Admitted: Air

Max Working Pressure: 0~145Psi

Applicable Tube:PU/PA/FEP/PFA

Installation Method

1. Before installation, make sure that the cutting surface of the tubing is vertical, there is no scar around the tube and the tube is not oval.

2. When inserting the connector, it must be inserted at the bottom of the connector. If the tube is not inserted in the end, it may cause air leakage.

3: After the tube is connected and installed, pull the tube to make sure that the tube cannot be pulled out.

4: When removing the air tube, press the connector clamp into the tube with thumb, and gently pull out the pneumatic tube with force

5: After installation, The Tube Can Rotate 360° to adjust the connector direction.

6: After repeatedly pulling out the pneumatic tube.The top frayed part should be cut off.Continue to use after trim.