uxcell Straight Pneumatic Push to Quick Connect Fittings G1/4 Male x 10mm Tube OD 10pcs

uxcell Straight Pneumatic Push to Quick Connect Fittings G1/4 Male x 10mm Tube OD 10pcs

Fit Tube OD and Thread Size: 10mm x 1/4" G; Operating Pressure: 0-0.9MPa; Operating temperature: 0 - 60 Degree Celsius Push to connect fitting can realize the pipeline together or disconnected without tools, mainly used for air compression systems, vacuum systems, pneumatic systems, 3D printers. Push-to-connect tube connection on one end and male threads on the other end. A good release cap can withstand greater and stronger pressure without tripping. Even after installation, the release cap can be rotated 360 degrees. Have abrasion resistance, light weight, and resistance to crushing and cracking, compressive and corrosion resistant, good sealing performance and long service life. Designed for using to connect with polyethylene, nylon and PU tubing. Quick and simple installation. Threads are pre-coated with PTFE for good sealing performance. Product Features:
Product Name : fittings
Model : PC10-02
Net Weight : 105g
Color : Gold Tone,Blue
Material : Plastic,Brass
Thread Size : 1/4" G
Tube Size (OD) : 25/64" / 10mm
Type: Male Straight Thread Connector
Thread Tube Inner Hole Type : Hex Type
Operating Pressure : 0-0.9MPa
Operating temperature：0 - 60 Degree Celsius
Dimension : 25mm x 17mm / 0.98-inch x 0.67-inch (L x W )

Package Content:
10 pcs x fittings

Description:
1.The fitting is designed for Polyurethane or Nylon tubing. Even after installation, the direction of the tube can be changed freely.
2.Push-to-connect tube connection on one end and male G threads on the other end.
3.A good release cap can withstand greater and stronger pressure without tripping.
4.Have abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life.
5.Elliptical release ring help to connect tube easily by manual, no special tools required.
6.Outside (and Inside where applicable) hexagonal wrench tightening.

Mounted:
1.Cut the pipe flat, no slope
2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak.
3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected.
4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.