DT-DIATOOL Diamond Core Drill Bit 1-1/4" - Welded Hole Saw 32mm with 5/8-11 Arbor for Granite Marble Hard Stone

DT-DIATOOL Diamond Core Drill Bit 1-1/4" - Welded Hole Saw 32mm with 5/8-11 Arbor for Granite Marble Hard Stone

Size: core bit diameter: 32MM, total length: 100MM, thread: 5/8"-11, diamond height: 10mm. Grit:#25/35 Application: Dry or wet use for granite marble. Wet use for other nature stone/concrete. Not recommend for rebar concrete and solid concrete. Ideal for drilling the faucet mounting holes in granite/quartz/marble countertop. Dry or Wet use: Wet drilling will greatly prolong the segment life.For specific operation tips, please refer to the product description. Machine: 5/8" angle grinder. Recommended RPM: 6000. Maximum RPM: 11000. If you want to install it on a hand drill, in addition to buy 1 additional adapter, be careful not to use the hammer mode. Laser welded technology avoids segments off when dry working. Vacuum brazed side protection offers clean cut & steel core protection (inside and outside both).
---------------------Description-------------------------------

Product Name:DT-DIATOOL 1pc Laser Welded Diamond Drilling Core Bit

Specification:

Diameter: 32MM, Total length: 100MM, Thread: 5/8-11

(Make sure it can be installed on your machine)

Quantity: 1pc

Application:

For hard granite marble all mature stone concrete.

Feature:

1. Drilling hard granite marble all mature stone concrete.

2. Dry or Wet Drilling , use wet will greatly prolong the segment life.

3. Ideal for drilling the faucet mounting holes in stone countertops, plumbing lines in showers and vanities.

4. Laser welded technology avoid segments off when dry working.

5. Vacuum brazed side protection offers clean cut & steel core protection.
=======The End=======