Luomorgo 4.5 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

Luomorgo 4.5 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance. Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade. Widely Used: Hole saws can cut 4-1 / 2 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc. Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut; the cutting depth is 1 1/4 inches. Easy to Use: Install the pilot hole and the hole saw, holding the drill straight to cutting surface and drill as clockwise rotation at a slow speed and holding steady. Specification:
Cutting Diameter: 4 1/2inch / 115mm
Cutting Depth: 1 1/4inch / 32mm
High Quality Material: M42 high-speed steel & Bi-metal

Package Includes:
1 x 4.5 inch hole saw
1 x hex shank drill bit adapter

How to Cut Successfully:
1. Install the pilot hole and the hole saw.
2. Holding the drill straight to cutting surface and drill as clockwise rotation.
3. When starting drilling, cutting at a slow speed and holding steady pressure.
4. Then the hole saw cut hole in no time.

Warm Tips:
1. Adult use only and always wear appropriate safety gear when using.
2. Due to manual measurement, please allow 1-2mm difference, thanks!
3. Our digital images are as accurate as possible. Because of the difference between the display and the light, the color is slightly different.