JIAWANSHUN PU Round Belt Welding Machine Polyurethane Belt Welder Round Belt Welder 110V with 150-400 ℃ Adjustable Temperature Electric Soldering Iron

JIAWANSHUN PU Round Belt Welding Machine Polyurethane Belt Welder Round Belt Welder 110V with 150-400 ℃ Adjustable Temperature Electric Soldering Iron

【What you can get】The round belt welding set includes an adjustable temperature electric soldering iron, a precise positioning pliers, and a multi angle scissors. With this set of tools, you can quickly cut and weld round strips. 【Application】 It can be used to weld V-belts, pentagonal belts, PU round belts, PU pipes, plastic strips, etc. according to the required size, and is widely used in industries such as machinery, mining, and smelting. 【How to operate】Use scissors to cut the belt to the required length, use positioning pliers to fix the two ends that need to be welded together, preheat the electric soldering iron in advance, and use the electric soldering iron to melt the two ends of the belt, and then fix the belt together. 【Adjustable temperature electric soldering iron】The temperature range is 150-400 ℃, and the temperature can be adjusted according to the boiling point of different belts. You can preheat the machine in advance. When using it, please wear anti scalding gloves and keep the soldering iron away from the skin to prevent burns. 【Integrated molding】Simple operation, fast welding speed, good effect, welded belt will not break and does not require cooling. Parameter
1.Name: Electric Soldering Iron

2.Main material:aluminum alloy

3.The length of welding belt:1mm-40mm

4.The use of bonding belts: V-belt, pentagonal belt, PU round belt, PU tube, plastic strips and other products can be easily melted.

5.Weight:1kg

How to use

1.The belt to be connected is fixed in the groove (usually V, O-groove) below the aluminum

fixture (the clamp main refers to the gasket and nut).

2.Specifically, remove the nuts on both sides of the nut and nuts (depending on the diameter of

the belt, if the belt can be inserted directly into the groove, do not remove the nut and gasket),

the belt into the groove, the gasket and Nuts re-fixed in the groove above the sides of the

plywood in a parallel state, the spacing is about 2cm or so is appropriate (can be placed in the

middle of the thermostat heater)