WOD RTC7 Engineering Grade Retro Reflective Tape Red, 4 inch Wide x 30 ft. Outdoor Waterproof Safety Reflector for Autos, Bikes, Camper, RV, Boat

WOD RTC7 Engineering Grade Retro Reflective Tape Red, 4 inch Wide x 30 ft. Outdoor Waterproof Safety Reflector for Autos, Bikes, Camper, RV, Boat

ENGINEERING GRADE REFLECTIVE TAPE - WOD Reflective Tape is constructed with enclosed lens retroreflective urethane film coated with a permanent acrylic adhesive. It is 6-mil thick and 30 feet long perfect length for one time projects to increase visibility and safety in areas where is needed. The adhesive has a dwell time of 24 hours, but reaches 75% of its adhesiveness after 15 minutes. CERTIFICATIONS AND USES - Reflective marking tape is designed to sustain 7-years of durability, exceeding the requirements of ASTM D4956 (Type 1) and EN-12899 RA1, and meeting the requirements of LS-300C (Reflectivity 1 Class 1) and FP-85 (Type II). Used for work zone devices and non-critical signs where retroreflection is necessary; caution tape, dot tape, on motorcycles, on trailers, on clothing, on vehicles, for construction, marking, safety signs, lettering, and graphics. ENHANCE SAFETY - WOD RTC7 Striping tape is designed primarily for permanent and temporary traffic signage for high visibility to keep you safe. It is easy to apply (applications surface should be flat and free of any debris) to trucks, trailers, vehicles, and anywhere you need to increase detection distance. COLORS FOR SAFETY - 6 Solid Colors: Blue, Green Orange, Red, Yellow, and Silver/White. Our tape is commonly used to embellish traffic signage or alert pedestrians to hazardous obstacles. Choose the color that meets your need. WOD Tape stands as a top-selling brand on Amazon, dedicated to providing only the highest quality tape products. As a USA-based small business, our commitment to excellence extends to both our products and customer service. Engineering Grade Retro-Reflective Tape

Product Description
WOD REF-7 Reflective Tape is 5.5 mils thick with Enclosed Lens Retroreflective Urethane Film coated with a permanent Acrylic Adhesive. Application surface should be flat (not recommended for unpainted stainless steel surface).

Uniform daytime and nighttime visual appearance. Application surface should be flat (not recommended for unpainted stainless steel surface).

Product may be screen printed, guillotine cut, die-cut, or thermal kiss-cut.

Certification
Meets or exceeds requirements of Federal Specification LS-300C (Reflectivity 1, Class 1), FP-85 (Type II), and ASTM D4956-94 (Type 1).

6 Colors Available
Silver/White - Yellow - Red - Green - Orange - Blue

Rainbow Pack Carries
Silver/White - Yellow - Red - Green - Orange - Blue

Applications
- Primarily designed for permanent and temporary traffic signage.
- Used for safety applications and for the entertainment industry.
- Used for work zone devices and non-critical signs where retroreflection is necessary.

Properties
Adhesive: Acrylic
Carrier/Backing: Enclosed lens retroreflective urethane film
Thickness: 5.5 mils
Adhesion: 50 oz/in (to stainless steel test panel)
Application Temperature: +40 F
Service Temperature Range: -40 F to +180 F
Application temperature range: 32 F to 140 F
Certifications: LS-300C (Reflectivty 1 Class 1), FP-85 (Type II), ASTM D4956-94 (Type 1)
3" neutral core/carton

Alternative to
Avery T-1500 Series, Nippon/Carbide 8100 Series, 3M 3200 Series.

Note: Sizes will be the tape industry standard metric sizes, ex. 12mm for every 1/2 inch of nominal value tape width (Rolls are give or take 5% wider or narrower than the nominal size).