White Oak Quartered Flake Wood Veneer 4.5" x 46" raw no Back 1/42" Thickness AA

White Oak Quartered Flake Wood Veneer 4.5" x 46" raw no Back 1/42" Thickness AA

Brand: White Oak Flake wood veneer raw Quartered Cut Q/C, Veneer Type: Raw Model: Flakey Figured 1/42" thickness thin flexible Q/C Wood Type: Oak White Flake Veneer Cut: Quarter Cut White Oak

Flake Quartered (straight grain) wood veneer 4.5" x 46" with no backing raw veneer 1/42" thickness AA grade quality. One piece per price as pictured. All pieces in sequence and matching. Last photo is a finished customer project using similar veneer. Ships rolled in corrugate flute. Other sizes and backed veneer are available. Measure from midpoint 4.5" and base is 5" and other end 4".
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.

About pictures
: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness
: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish
: most any conventional finishing products can be used with veneer that is applied correctly.

Disclaimer:
Sometimes veneers have minor splits or tears in them. These are usually taped or re