Edge Supply Red Oak 1" X 25' Roll, Wood Veneer Edge banding Preglued, Iron on with Hot Melt Adhesive, Flexible Wood Tape Sanded to perfection. Easy

Edge Supply Red Oak 1" X 25' Roll, Wood Veneer Edge banding Preglued, Iron on with Hot Melt Adhesive, Flexible Wood Tape Sanded to perfection. Easy

Real wood veneer edging use to repair or enhance cabinetry, furniture, shelving, crafts, or any other flat or cylindrical projects. Pre-glued with hot melt adhesive and easy to apply with a household iron. Finely sanded to perfection, can be trimmed and cut with scissors. Can be stained or applied any lacquer finish. Suitable to be applied to wood, plywood, particle board, hardboard, metal.

High quality wood veneer edge banding

Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish.

Real red oak wood pre-glued edge banding

Our red oak wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive 1 roll of red oak wood, iron-on veneer edging with your purchase.

Easy to install plywood edge banding

The only tool you need to apply this veneer edging is a regular household iron at cotton (hot) temperature. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond.

How to apply Edge Supply Edging

1. Prepare Surface Edge:

Fill any large holes, sand rough spots, remove sawdust, cut edging ½" longer than surface to be covered.

2. Apply Edging:

Preheat iron on “cotton” setting, position edging, slowly press iron over edging, check to see if glue is melting. Note: Use kraft paper or aluminum foil to protect iron bottom.

3. Bonding:

While still hot, press veneer down firmly with wood block or roller, If there is a mistake, simply reheat and reapply.

4. Trim Edge:

Allow edging to cool completely, trim any excess with an edge trimmer, a razor blade or file, sand smooth and finish as desired.

BUY NOW this premium quality, red oak iron-on wood veneer edging