2" 5x4.5 Wheel Spacers - Fits Buick Fits Cadillac Fits Chevy Fits Oldmobile Fits Pontiac - 2 Inch (50mm), 5x114.3, 12x1.5 Studs - Set of 4 - Black

2" 5x4.5 Wheel Spacers - Fits Buick Fits Cadillac Fits Chevy Fits Oldmobile Fits Pontiac - 2 Inch (50mm), 5x114.3, 12x1.5 Studs - Set of 4 - Black

Vehicle Bolt Pattern: 5x4.5 Wheel Bolt Pattern: 5x4.5 Hub Bore: 82.5mm (non Hubcentric) Thread Pitch: 12x1.5 Thickness: Each Spacer Measures 2" Thick THESE SPACERS WILL FIT THE FOLLOWING VEHICLES

Fits Ford:

• 2001-2012 Escape
• 2006-2012 Fusion
• 1993-1997 Probe

Fits Mazda:

• 2003-2020 3
• 2004-2020 6
• 2016-2020 CX-3
• 2013-2020 CX-5
• 2010-2012 CX-7
• 2007-2020 CX-9
• 1995-2002 Millenia
• 2006-2015 MX-5 Miata
• 2001-2006 Protege Sedan (5 lug only)
• 1989-1995 RX-7
• 2004-2011 RX-8
• 1999-2006 MPV
• 2001-2011 Tribute
• 2006-2011 Milan

Fits Hyundai:

• 2006-2016 Azera
• 2007-2016 Elantra
• 2009-2016 Genesis
• 2010-2016 Genesis Coupe
• 2009-2016 Santa Fe
• 2006-2016 Sonata
• 2003-2008 Tiburon
• 2006-2016 Tucson
• 2007-2016 Veracruz
• 2001 XG300
• 2002-2005 XG350

Fits Kia:

• 2004-2009 Amanti
• 2010-2016 Forte
• 2006-2016 Optima
• 2007-2010 Rondo
• 2002-2016 Sorento
• 2010-2016 Soul


ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
1. Your lugs studs will need to be shortened by grinding them down
2. You can replace your studs will shorter studs
3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)




ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

"" "