U.S. Solid 1/4inches NPT 3 Way 2 Position Pneumatic Electric Solenoid Valve DC 12 V

U.S. Solid 1/4inches NPT 3 Way 2 Position Pneumatic Electric Solenoid Valve DC 12 V

1/4″ NPT 3‑Way 2‑Position Valve (DC 12 V): Compact solenoid valve for simple on/off and vent control in pneumatic systems. Aluminum Alloy Body, IP65 Rated: Lightweight and corrosion-resistant housing with protection against dust and water. DC 12 V Coil, ~4 W Power Draw: Efficient and stable switching performance drawing approximately 0.33 A. Filtered Air Only: Designed exclusively for clean, filtered compressed air—use filtration to prevent seal damage. Unidirectional Flow: Install following the flow direction arrow for proper operation. Pneumatic types of valves can be found in a wide array of industries. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. Manufacturing machines use pneumatic valve because they are ideal for automation.
The U.S. Solid 1/4" NPT 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.This valve is a 3/2 valve which means the valve has three port connections and two flow positions. One valve seal always remains open and the other closed in the de-energized mode. When the coil is energized, the mode reverses. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. This valve is made with an aluminum alloy and has an aperture of 1/4”.

Specifications:

Brand U.S. SOLID

Model: USS- PSV00032

Valve Type: 2 Position 3 Way

Thread Type: NPT

Operation/ Property: Normally Closed

Material: Aluminum Alloy

Size: 1/4"

Voltage: DC 12 V

Applicable Media: Filtered Air

Effective Section Area (mm³): 16

Flow Value (Cv): 0.89

Insulation & Protection: Class F; IP 65

Working Pressure: 0.15 ~ 0.8 Mpa

Max. Pressure Resistance: 1.2 Mpa

Direct Operated/ Pilot Operated: Pilot

Operation Temperature: -5℃ ~ 50℃

Package Weight: 7.6 oz.

Package Dimensions: 5.5” x 2.75” x 1”