SmartLine 15 ft x 24 ft Oval Swimming Pool Liner | Waves of Poseidon | Overlap Style | 48-52 Inch Wall Height | 25 Gauge Vinyl | for Steel Sided Above

SmartLine 15 ft x 24 ft Oval Swimming Pool Liner | Waves of Poseidon | Overlap Style | 48-52 Inch Wall Height | 25 Gauge Vinyl | for Steel Sided Above

MEASURE TWICE, BUY ONCE – Whether installing for the first time, or replacing an existing liner, the Waves of Poseidon pattern offers durability while not breaking the bank. Be sure to check the measurements of your swimming pool to assure the correct size is purchased. Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Oval pool size is determined by measuring from the center point across the longest and widest ends. PRETTY PLEASING PATTERN - Tile designs of interchanging navy and sky blues roll like waves at the top of this beautiful Waves of Poseidon pool liner print. The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees. NO TROUBLE TO INSTALL - Overlap liners are draped over the walls of the pool during the installation process. Once the bottom seam is even near the cove, the liner is ready to be secured. This material is held in place through the use of coping strips prior to putting the top rails back onto the pool. Bead receivers are not needed for this type of liner. The liner is made to work with pools which have a flat bottom and wall heights of 48” or 52”. ***Will not work with Pop-Up pools*** STAY COOL IN THE POOL – Enjoy the warm weather while spending quality time with family and friends. Your backyard aboveground pool will surely become the place to be during those hot summer days. Stay cool in more ways than one with the Waves of Poseidon liner. UNIVERSAL GASKET SET - The included kit is for the pool’s skimmer and return. This skimmer gasket will work with either standard sized skimmers or wide-mouth versions. These pieces will help prevent corrosion of the pool wall and should be replaced each time a new liner is installed as they become dry over time which could cause leaks.

Liner Knowledge:

• Overlap style is made to drape over the pool wall and is held in place with coping strips (not included)
• Does not require the presence of a bead receiver
• Lay out in the sun for at least 1-hour prior to installing
• Air temperature should be at least 70-degrees when putting in
• Be sure to measure your pool and wall height prior to ordering
• Will NOT work with Pop-Up pools

Liner Specifics:

• Size: 15ft x 24ft
• Wall Height: 48" or 52"
• Shape: Oval
• Connection: Overlap
• Gauge: 25
• Material: 100% Virgin Vinyl

Liner Material:

• 100% virgin vinyl construction
• Our liners have been vulcanized, high pressure heat bonded and vacuum sealed
• Material has been RF vinyl welded with lap welded seams
• Durable liners free of impurities

Liner has a 25 year limited warranty against manufacturer material defects