Tegara 6 Inch 600DS CNC Double Station Milling Machine Vise 0.0002 in. 202-0999 R

Tegara 6 Inch 600DS CNC Double Station Milling Machine Vise 0.0002 in. 202-0999 R

MFG SKU #: 202-0999 Brand: Tegara Jaw Opening: 4.9 Jaw Width: 6 Jaw Depth: 1.75 Overall Length: 20.47 Bed Height +/- 0.0005": 3.25 Jaw Plate Thread Size: 1/2"-13 Jaw Plate Threads Spacing (Inch): 3.875 Clamping Force (LBS): 6000

• Unique leadscrew design provides ability to clamp either same sized parts or dissimilar sized parts, even if the difference between the two parts is as big as 4.9", while allowing 6 different jaw clamping configurations. Unique clamping force equalization mechanism allows same amount of clamping force applied evenly to different sized part when jaws starts tightening
• Unlike other less expensive import vises, 600DS offers advanced improvements to prevent jaw lifting by using eccentric pin locking mechanism no matter if the vise is lay flat in normal fashion, on the side, or vertically upright in a tower vise configuration
• Up to 6000 Lbs of clamping force - Clamping repeatability within +/- 0.0002" - Fixed Jaw perpendicular to bed within 0.0005" - Fixed jaw parallel to vise's keyway within +/- 0.0005" - Vise Jaw Plate thread and spacing is compatible with other American made vise on the market
• Vise body made from 80,000 PSI stress relieved ductile cast iron - Vise bed is hardened to 45 HRc and Jaw Plates flame hardened to 54 HRc - Footprint and distance from the keyway to stationary jaws meet the industry standard - Bed height tolerance of +/- 0.0005" - Vises' bed parallel to base within 0.0005" - Bed height matched to 3.25" +/- 0.0005" (matched bed height on pair orders)
• By removing the middle fixed jaw, 600DS can be converted into a 12.25" capacity single station vise with the included conversion hardware kits. In this single station configuration, unlike other competitor's vise, 600DS's rear jaw close in towards the operator and able to close completely. Another hidden advantage with front jaw being fixed is that it allows CNC machine operator to program in Y axis positive direction
• Precision ground flat sides allow the vise to be mounted on each side or in high density mounting system
• Chip guard pre-installed on each vise and we stock replacement chip guard
• Tegara vise comes with 10 year limited warranty against defects in material and workmanship for the life of the product or part. (The life of the product or part is defined as that point in time when such item no longer functions due to normal wear and tear). Failure to properly maintain and/or properly operate the product or part under normal conditions will void this warranty. This warranty does not cover any product or part that has been worn out, abused, heated, ground or otherwise modified, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use